Finding your suitable readers for pex ice maker kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for pex ice maker kit including detail information and customer reviews. Let’s find out which is your favorite one.
703 reviews analysed
1. Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough opening of 5-3/4-inch W x 4-7/8-inch H x 3-1/2-inch D
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
2. Whirlpool W10267701RP 25-Feet PEX Tubing Ice and Water Kit
Includes one 25-Feet PEX tubing and fittings for ice and water hook up.
From the Manufacturer
Includes one 25-Feet PEX tubing and fittings for ice and water hook up.
3. WATTS P-667 Ice Maker Tee Valve, 1/2-Inch Cts x 1/4-Inch Od
- 1/2 Cts x 1/2 Cts x 1/4 O.D. Quick connect tee valve for use with 1/2″ Copper, PEX, CPVC, polybutylene and 1/4″ O.D. Pex, polyethylene or copper Supply lines for ice makers and water connections
- Made from high quality materials and highly durable
- Manufactured in China
- Watts quick connect products are the easiest method on the market for joining copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing
- Plastic quick connect TEE with 1/2-Inch CTS on two sides with 1/4-Inch OD ball valve on third side
- Perfect for DIY pipe repair
- Approvals include FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP, and IAPMO ASSE 1061-2006
- Rated for 250psi at 75 degrees F and 100psi at 180 degrees F
1/2 CTS x 1/2 CTS x 1/4 O.D. quick connect tee valve for use with 1/2” copper, PEX, CPVC, and 1/4” O.D. PEX, polyethylene or copper supply lines for ice makers and water connections in refrigerators.
From the Manufacturer
This fitting incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools. It works with copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing.
4. Metpure Ice Maker Fridge Installation Kit – 25′ Feet Tubing For Appliance Water Line With Stop Tee Connection and Valve For Quick Installation, 1/4" Fittings For Potable Drinking Water
- ◼️ COMPLETE ICE MAKER WATER LINE KIT: This kit comes complete with a 25′ white tubing, heavy duty brass universal adapter tee with 1/4″ shut off valve at the water supply end, and a 1/4″ quick connect adapter at the appliance connection end. This kit was put together by field technicians and plumbers to ease their onsite installation and now it is available to the general public.
- ◼️ SUPER DURABILITY: Linear low density polyethylene (LLDPE) line is extremely flexible, crack and impact resistant. It is the perfect material of choice for running fridge water line by professionals due to its high bendability, pliability, and yield that high density PEX line WILL NOT provide.
- ◼️ NO ODOR, NO BAD TASTE, AND NON-TOXIC: The tubing, certified by NSF ANSI 61 to ensure safety for potable drinking water, contains no toxic material and will leave no odor or plastic taste in the water. The heavy duty universal brass valve adapter is lead free to ensure the drinking water that passes through is safe and in compliance with the federal act of Low Lead Content in potable water.
- ◼️ EASY INSTALLATION: The installation is a breeze with Metpure ICEMK2514 Kit. The adapter universally fits both existing supply valve and line, saving you unnecessary trips to the hardware store for conversion adapters. Also the kit comes with a shut off valve so in case maintenance is needed, the water can be turned off with the valve. Moreover, the kit comes with a quick connect female adapter that you simply screw on the end of your point of use without any tools required.
- ◼️ VERSATILITY: This kit is great for a wide variety of applications. Connect at any water source with an existing water supply shut off valve & line and run the tubing to your freezer, refrigerator, ice maker, coffee brewer, water filtration inlet, humidifer, water dispenser, drinking fountain, and many more.
Complete Metpure Ice Maker Fridge Installation Kit put together by field technicians and plumbers. This complete kit is field tested and approved by professionals to be installed as water line connection from an existing water supply valve & line to your point of use, such as a freezer, refrigerator, icemaker, water dispenser, humidifer, water filtration system, drinking fountain, coffee maker, and many more.
Will this kit work for my connection?
I like to connect this from my undersink water supply valve and line and run this to my fridge – YES.
I have a dedicated water supply valve behind my refrigerator and would like to use this kit to connect – NO.
I have an existing water filtration system, such as an RO system, and would like to split the filtered water into my fridge – NO.
I would like to connect this from an angle supply valve & line and connect to my ice maker – YES.
What’s included in the product?
QTY 1 roll: 25′ of 1/4″ OD white-colored NSF certified LLDPE tubing
QTY 1 package: Metpure EZROADP14 – includes 1/2″ x 3/8″ reducing nipple, 1/2″ x 3/8″ universal adapter tee, 1/4″ quick connect ball valve
QTY 1: 1/4″ female x 1/4″ quick connect adapter
QTY 1: installation manual
5. Whirlpool 8212547RP 5-Feet Pex Ice Maker Hook-up Kit
This is a genuine replacement part.
From the Manufacturer
Refrigerator water supply kit includes everything needed for easy installation and fits most refrigerators. Refrigerator water supply kit provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers. Refrigerator water supply kit contains one 5-Feet pex tubing and fittings.
6. SharkBite 25024 Plumbing Installation Kit
The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
7. iSpring ICEK Ultra Safe Fridge Water Line Connection and Ice Maker Installation Kit for Reverse Osmosis Systems & Water Filters
- Connects any water filtration system (including reverse osmosis systems) to the ice maker or water dispenser of your fridge
- Delivers crystal clear ice cubes and great tasting RO water to your fridge, superior to inline fridge filters
- Kit includes everything you need for the installation – 20 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, and a compression fitting set. Tested by independent third-party to meet NSF/ANSI Standards
- Durable and easy to install – Push-in quick connect fittings offer easy DIY installation with no tools required
- Push-in quick connect fittings offer easy DIY installation with no tools required
The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.
8. LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing
Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.
From the Manufacturer
LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.
9. SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
10. Eastman 48316 icemaker connector
- LENGTH: The length of this connector hose is 8-Feet long
- DIMENSION: This supply line connector features 1/8-inch ID (1/4-inch OD) PEX hose
- MATERIAL: This hose is made of high-impact PEX which provides strength as well as includes brass captured nuts
- DURABLE: The PEX material of this appliance connector provides durability which prevents it from kinking making it last longer
- EASY INSTALLATION: This refrigerator ice maker connector is quick and easy to install without hassle
By our suggestions above, we hope that you can found Pex Ice Maker Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!